LED Status Indications

STARTUP STATUS

  • LIGHT CYAN (SHORT)

    • Device received power, starting boot

  • BLINKING GREEN

    • Waiting for capture to complete, ejecting SD card

Removing the MicroSD card before the LED lights solid green may damage the card's format.

  • SOLID GREEN

    • (After light cyan) Booting

    • (After button push) SD is safe to eject

  • SOLID RED

    • SD card full or not detected

CONFIGURATION STATUS

  • SOLID CYAN

    • Wireless config unchanged on device/MicroSD

  • BLINKING CYAN

    • Updating device wireless to match MicroSD config.txt

    • Updating device wireless state to match MicroSD config.txt

      • Changing from wireless disabled -> wireless enabled

      • Changing from wireless enabled -> wireless disabled

  • SOLID MAGENTA

    • Device button listening for capture override

  • INVERSE BLINK MAGENTA

    • Button pushed once during capture override mode at startup - config set to default image capture

    • Button pushed twice during capture override mode at startup - config set to default video capture

CAPTURE STATUS:

  • SOLID BLUE

    • Has video signal and capturing images to SD card

  • SOLID YELLOW

    • Has video signal and capturing video to SD card

  • SOLID WHITE

    • Has no video signal

UPGRADE STATUS:

  • BLUE/RED POLICE PATTERN

    • Screen Crab detected upgrade.bin on MicroSD card at boot - starting device upgrade

  • BLUE/MAGENTA POLICE PATTERN

    • Screen Crab starting framework upgrade

  • FOREVER BLINKING RED - only during device upgrade (following police pattern)

    • Software Upgrade Failed

Do not unplug power from the device or remove the MicroSD card during the upgrade process as doing so may render the device inoperable.

Last updated